No hot water?We'll sort it today.
Hot water is all we do. Licensed plumbers, every major brand, and a fixed price agreed before a single tool comes out of the van.
Fastest for a leak or no hot water: call. Not urgent? Send the form — we reply with next steps.
- Same-day where possible
- Fixed price up front
- Licensed & insured
- All major brands
Tell us what's happening
Answer a couple of quick questions so we can get your hot water sorted.
Prefer to speak now? Call 08 6245 5556
What's happening with your hot water?
Start here and we'll tell you what's likely going on, what it usually takes to fix, and what it should cost.
No hot water
Element, thermostat, pilot or ignition faults diagnosed on site — repaired the same day where possible.
See no hot water detailsLeaking or burst
Prioritised response. We isolate the system, contain the damage and set out your options straight away.
See leaking or burst detailsNeeds replacing
Honest repair-or-replace advice, then a fixed written quote for the right system for your home.
See needs replacing details
A local team, not a call centre
You'll deal with an experienced local hot water specialist who explains the fault, gives you the options, and leaves the site clean.
Speak to a specialistWhat we do
One team for the whole job — diagnosis, supply, install and compliance.
Brands we service
We repair, replace and install every major Australian hot water brand. Open a brand to see typical models, warranty terms, common faults and expected lifespan.
Not sure which system you have? Describe it in your enquiry and we'll work it out with you.
Hot water repairs, servicing and replacement in Perth
Hot water is the only trade we work in. Day to day that means hot water repairs in Perth — failed elements, thermostats, pilot lights, ignition faults and leaking valves — along with hot water system replacement when a cylinder has reached the end of its life, and new hot water installation for renovations and extensions. If you have no hot water at all, or the tank is leaking, our same-day hot water service is the fastest way to get it looked at.
Hot water cylinder repairs and servicing
Most storage cylinder faults come down to a small number of parts: the heating element, the thermostat, the sacrificial anode or the pressure and temperature relief valve. A relief valve that drips constantly, water that runs warm instead of hot, or rusty water at the tap are all worth a look before the tank fails completely. Regular hot water system service work — checking the anode, exercising the relief valve and confirming tempered water at the outlet — is the cheapest way to get full life out of a cylinder. Our guide to common hot water problems explains what each symptom usually means, and no hot water? safe checks before you call covers what you can safely check yourself.
Repair or replace your hot water system?
A repair is usually the sensible call when the cylinder itself is sound and the fault is a serviceable part. Once a tank is actually leaking from the shell, or it is well past ten years old and the repair cost is a large slice of a new unit, hot water tank replacement generally makes better financial sense. We give you both numbers and let you decide. Read repair or replace: how to decide and what a hot water replacement costs in Perth before you commit to anything.
Hot water systems we work on
Perth homes run on a mix of system types, and the right replacement depends on what is already connected at the house. Electric hot water storage is the most common and the simplest to swap like-for-like. Gas hot water and continuous flow units suit households that run out of hot water in the morning. Heat pump hot water uses far less electricity than a standard element, though placement and model choice still matter for getting the best efficiency — the Australian Government's Your Home hot water guide is a good neutral overview. Solar hot water is serviced and replaced as well.
Where we work, and what it costs to run
We cover Greater Perth — the city and Subiaco, the northern suburbs through Joondalup, the coast around Scarborough and Fremantle, and south to Rockingham and Armadale. See the full list of Perth suburbs we service. Water heating is one of the larger slices of a household energy bill, so it's worth comparing running costs before you choose a replacement — the Australian Government energy.gov.au hot water pages are a useful starting point, alongside Water Corporation for local water supply information and Synergy for electricity plans and tariffs. Any work we do is carried out by plumbers licensed through Building and Energy WA, and you get the compliance paperwork on completion. For council-specific requirements in the inner city, see the City of Perth.
Common questions
Written by the plumbers who do the work. More detail in our full FAQ hub.
- Same-day service is usually available across Perth when you call early. Call us and we'll give you the earliest available time.
Cold shower this morning?Let's fix it today.
Talk to a licensed hot water specialist, get the fault explained in plain English, and see the fixed price before you commit to anything.